Skip to content
Breath of the Wild
Powered by Pagefind
English
Guides

BotW Purah: Hateno Lab Location, Camera and Rune Upgrades

Find Purah at the Hateno Ancient Tech Lab in Breath of the Wild, restore the Camera, check rune upgrade materials, and continue her related quests.

10/21/2026 1.9.0 QuestFern Team Last updated: 10/21/2026 4 min read

Purah is the Sheikah researcher at the Hateno Ancient Tech Lab in The Legend of Zelda: Breath of the Wild. Visit the lab on the hill above Hateno Village to restore the Camera during Locked Mementos. She remains your contact for ancient-material rune upgrades afterward.

Where is Purah, and when should you visit?

Follow the road uphill from Hateno Village to the laboratory. Speak to Symin and Purah inside to advance the introductory dialogue. If you are following the opening story, Impa sends you here after your first visit to Kakariko.

Purah standing on a platform beside books and equipment inside Hateno Ancient Tech Lab
Purah works inside the laboratory above Hateno Village.
StageLocationReason to visit
Impa’s request activeHateno Ancient Tech LabAsk about the damaged Sheikah Slate
Blue flame deliveredOutside furnace, then the lab interiorHave the Slate repaired and test the Camera
Repair finishedReturn to Impa in KakarikoContinue the photo-memory story
Ancient materials collectedReturn to Purah at the same labPurchase the available rune upgrades with materials

The lab becomes a travel gate when its furnace is lit, making later material deliveries easier.

Which quests does Purah connect to?

QuestHow it starts or continuesReward or result
Locked MementosFollow Impa’s direction to the lab and fulfill Purah’s blue-flame requestRestored Camera, Hyrule Compendium and album functions
Slated for UpgradesSpeak to Purah for the upgrade request after restoring the SlateSheikah Sensor+, Remote Bomb+ and Stasis+
Sunshroom SensingAfter obtaining Sensor+, speak to Symin at the labA lesson in tracking photographed subjects and access to his picture service
Robbie’s ResearchPurah directs you to Robbie in AkkalaRepair his ancient oven; Robbie’s reward and equipment exchange are handled there

The Sheikah Slate rune guide explains every rune and its controls. The table here helps you choose the right person and quest before spending materials.

How do you finish the Camera repair?

Bring a torch to the ancient furnace in Hateno Village, take its blue flame, and carry it up to the furnace outside the lab. Light roadside lanterns as you go so you have closer places to relight the torch. Rain extinguishes an exposed flame, so wait for suitable weather instead of repeating the whole route in a downpour.

Return to Purah once the lab furnace is burning blue. After the repair, equip the Camera, photograph her, and speak to her again to show the image. Then head back to Impa for Captured Memories.

The Camera viewfinder recognizing Purah inside the Hateno lab
Use the restored Camera to photograph Purah, then show her the picture.

What should you bring for each upgrade?

UpgradeMaterial paymentWhat changes
Sheikah Sensor+Ancient Screw ×3Track subjects registered in the Hyrule Compendium
Remote Bomb+Ancient Shaft ×3Stronger explosions and shorter recharge time
Stasis+Ancient Core ×3Freeze enemies as well as objects

You can complete these upgrades separately. Purah does not charge rupees, and Magnesis and Cryonis do not have upgraded versions through this quest. See ancient materials before selling the parts you need.

A Stone Talus glowing yellow under Link’s Stasis targeting
Stasis+ extends the rune to enemies, including a Stone Talus.

For Compendium pictures, speak to Symin. For ancient weapons and armor, follow the separate route to Robbie in Akkala. Purah’s material upgrades improve Slate functions; they do not buy equipment from the ancient oven.

FAQ

Where is Purah in Breath of the Wild?
She is inside the Hateno Ancient Tech Lab on the hill above Hateno Village. Follow the uphill road from the village; the lab is separate from the houses and shops below.
Why will Purah not restore the Camera yet?
Follow the Locked Mementos dialogue at the lab and light its outside furnace with blue flame from the village’s ancient furnace. Return inside for the repair, then photograph Purah and show her the picture.
What materials does Purah need for upgrades?
Sheikah Sensor+ needs three Ancient Screws, Remote Bomb+ needs three Ancient Shafts, and Stasis+ needs three Ancient Cores. These upgrades do not cost rupees.
Can Purah upgrade Magnesis and Cryonis?
No. Her upgrades cover the Sheikah Sensor, Remote Bomb and Stasis. Magnesis and Cryonis have no upgrade through her quest.

Related Articles

Was this helpful?

Privacy settings

Allow cookies for visit statistics and advertising? You can keep browsing without choosing.Privacy Policy